316 Stainless Steel Flat Bar
316 stainless steel flat bar is a type of metal product made from stainless steel alloy 316.Known for its ease of shaping and fabrication, this flat bar variant is highly favored, especially in scenarios where exposure to tough conditions or corrosive substances is a concern, such as marine environments. Our offerings come in a diverse range of sizes, thicknesses, and finishes, making them an ideal fit for a wide array of projects.
Key Features of 316 Stainless Steel Flat Bar
316 stainless steel flat bar has high strength and great corrosion resistance to extreme temperature and corrosion. Furthermore, it offers moderate weldability, making it suitable for cutting and machining when utilizing appropriate equipment. The smooth surface of this stainless steel variant is easily cleaned and maintained. Notably, these flat bars can be recycled and reused without compromising their inherent properties.
Where to use 316 Stainless Steel Flat Bar ?
316 stainless steel flat bar has a wide range of practical applications, like crafting components for medical instruments, laboratory benches & equipment, food preparation equipment, railings & trim and oil rig pumps. It is also a preferred choice for manufacturing building supports, engine components, food service machinery, handrails, industrial artwork, pharmaceutical equipment, furnace components, heat exchangers, valves and pumps, chemical equipment, as well as parts intended for marine applications. Furthermore, the 316 stainless steel flat bar is suitable for use in woven or welded screens for mining along with threaded fasteners and springs.
316 stainless steel flat bar sizes
316 stainless steel flat bars come in a variety of sizes to suit different applications and project requirements. The sizes can vary based on width, thickness, and length. Here are some common size ranges for 316 stainless steel flat bars:
– Smaller widths: Typically around 1/8 inch (3.18 mm) to 2 inches (50.8 mm)
– Larger widths: Can go beyond 2 inches, depending on specific requirements
– Thinner thicknesses: Usually around 1/8 inch (3.18 mm) to 1/4 inch (6.35 mm)
– Thicker thicknesses: Can range from 1/4 inch (6.35 mm) to several inches, based on the application
– Standard lengths: Commonly 10 feet (3.05 meters) or 12 feet (3.66 meters)
– Custom lengths: Bars can be cut to specific lengths as needed
Stainless steel flat bars are produced to meet industry standards and customer specifications, so you should be able to find the size that suits your project’s requirements. If you’re looking for precise size options, it’s recommended to check with suppliers or manufacturers who specialize in stainless steel products.
|Yield Point||Tensile Strength||Elongation in 2″||Elasticity||Brinell Hardness||Machinability Rate||Density||Yield Tensile Strength||Melting Point|
|35/30,000 psi||80/75,000 psi||60%||28 ksi||170/160||45%||0.289 lb/in3||42,100 psi||2,500-2,550 F|
We provide 316 stainless steel flat bars in a wide range of finishing options. Select from:
- Mill finish
- Slightly grainy finish
- Custom finish