X6CrNiTi18-10 Stainless Steel
- Excellent toughness
- High-temperature strength
- Low thermal expansion
- High oxidation resistance
- Good scaling resistance
- Low magnetic permeability
- Resistant to stress corrosion cracking
- Uniform corrosion resistance
- Resistant to pitting and crevice corrosion
- Easy to clean and maintain
X6CrNiTi18-10 Stainless Steel Manufacturer
X6CrNiTi18-10 stainless steel is a type of austenitic stainless steel. It contains chromium, nickel, and titanium element. The addition of titanium also enhances its resistance to intergranular corrosion.
This austenitic stainless steel is a widely used material in various industrial applications due to its exceptional corrosion resistance, high strength, & excellent formability. It also withstands heavy loads and high temperatures without losing its structural integrity.
The chemical composition of X6CrNiTi18-10 stainless steel is strictly regulated by international standards. Thus, ensuring consistent quality and performance. It is accessible in a broad array of shapes and sizes, including bars, tubes, sheets, and plates, to meet different application requirements.
For your unique requirements, Tuolian provides a highly customized service. This allows for meeting customer specifications quickly & easily. Message us for more details!
Extensive Applications
- Food processing equipment
- Pressure vessels and tanks
- Chemical processing industry
- Heat exchangers
- Domestic kitchenware
- Automotive
- Architectural
- Marine applications
- Fasteners and springs
- Petrochemical
- Aerospace component
- Pharmaceutical industry
- Mechanical Properties
- Chemical Composition
- Standard
| Parameters | Specifications |
| Grade designation | X6CrNiTi18-10 |
| Steel Type | Austenitic stainless steel |
| Density | 7.9 g/cm³ |
| Melting Point | 1400-1450 °C |
| Tensile Strength | 500-700 MPa |
| Yield Strength | 200-250 MPa |
| Modulus of Elasticity | 190-210 GPa |
| Elongation at Break | 40-50% |
| Hardness, Rockwell B | 80 |
| Impact Strength | 100-150 J |
| Poisson’s Ratio | 0.3 |
| Thermal Conductivity | 15-25 W/m.K |
| Specific Heat Capacity | 500 J/kg.K |
| Electrical Resistivity | 0.75 x 10^-6 Ω.m |
| Element | Composition (%) |
| Carbon | ≤ 0.08 |
| Silicon | ≤ 1.00 |
| Manganese | ≤ 2.00 |
| Phosphorus | ≤ 0.045 |
| Sulfur | ≤ 0.030 |
| Chromium | 17.0 – 19.5 |
| Nickel | 10.0 – 12.0 |
| Titanium | 5 x C – 0.7 or ≤ 0.80 |
| Iron | Balance |
| Standard | Purpose |
| EN 10088-1 | Defines the technical delivery conditions for hot or cold rolled sheets/plates, strips, and bars for general purposes. |
| EN 10216-5 | Specifies the technical delivery conditions for seamless steel tubes for pressure purposes. |
| EN 10217-7 | Specifies the technical delivery conditions for welded steel tubes for pressure purposes. |
| ASTM A312/A213/A269 | Specifies the technical requirements for seamless and welded austenitic stainless steel pipes. |
| ASTM A240/A480 | Specifies the technical requirements for general-purpose and heat-resisting chromium and chromium-nickel stainless steel plate, sheet, and strip. |
| ASTM A276/A479 | Specifies the technical requirements for hot or cold finished bars and shapes made from stainless steel. |
